top of page

ETC Lustr 2 LED Leko

Lustr® array

We put a twist of lime in the luminaire and mixed it all up. ETC's x7 Color System™ combines a balanced recipe of up to seven colours to create evocative colour mixes. The Source Four LED Series 2 Lustr array takes the idea even further, with the addition of a lime-green LED emitter. Lime green increases the luminaire's lumen output in open white and lighter tints to make them brighter and livelier, better matching the colour of a conventional Source Four fixture. The lime also enriches colour-rendering by better marrying the red and blue ends of the colour spectrum, for truer-to-life light that fills in the gaps that ordinary LEDs leave behind. Source Four LED Series 2 Lustr We also added more red to the x7 Color System in the Source Four LED Series 2 Lustr array. Working in unison with the lime-green emitter, the extra red means the luminaire can produce ambers, straws and pinks up to three hundred percent as bright as those from the original Source Four LED™. The deeper, richer colour from the Source Four LED Series 2 Lustr array will evoke the strongest audience reaction to your sunset, moonlight and dramatic scenes.

s4 LED series 2 back
ETC Source Four LED Series 2 Lustr with Shutter Barrel (Black)


• 60-LED array
• ETL listed to UL1573 – the standard for stage and studio
lighting units
• IP20-rated for indoor use
• Power and DMX in/thru connections for easy setup
• User-friendly control interface with multiple modes and
xture settings



• Rugged die-cast all-metal housing
• Available in black (standard), white or silver gray or custom
colors (contact factory)
• C-clamp
• Positive-locking double-clutch xture body
• Slot for glass or stainless steel patterns and soft-focus diffuser
• Wide accessory slot with sliding cover for motorized pattern
devices or optional iris
• Hanging yoke standard. Optional yoke/ oor-stand available


• 100VAC to 240VAC 50/60Hz universal power input
• Neutrik power in and thru connections
• Up to nine Lustr or seven Daylight HD/Tungsten HD luminaires
(15A max) may be linked via power thru connector (10 Lustr or 8 Daylight HD/Tungsten HD xtures total per circuit) when used with R20 Relay Module or Unison® EchoTM Relay Panel


• Consult breaker-trip curves when used with other
equipment. Requires power from a non-dim source
• Inrush

•120V: 50A (First half-cycle)

•240V: 107A (First half-cycle)


• 20,000-hour LED life (20,000 hours to 70% intensity)

• 60 Luxeon® Rebel LED emitters



• Exclusive x7 Color System seven-color LED array (Lustr)
• Selection from the x7 Color System to provide high quality,
variable-white light

• Tungsten HD (2700K-4000K)

• Daylight HD (4000K-6500K)
• Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
• Broad-spectrum color interacts seamlessly with conventional sources
• Exclusive optional red-shift option emulates tungsten dimming performance



• Use the included soft-focus diffuser for creating washes or soft light
• Best performance using ETC’s EDLT lens tubes
• Can use all ETC Source Four interchangeable lens barrels: 5°,



• 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color shift during dimming
• RDM functionality for address and setting changes



• Ambient operating temperature of 32° to 104°F (0° to 40°C) • Active electronic thermal management for
droop-free operation
• Quiet fan cooling
• Fixture is designed for continuous operation up to 104°F
(40°C) ambient temperature and requires free ow of air around xture housing



Power Input Cables
Use information below to order 5’ power input leads with factory- tted connectors
Power Thru Jumpers
Note: Power thru jumpers connect to xture’s output (thru) connector to provide link to successive xtures diffusers



5’ PowerCon to parallel blade U-ground (Edison) connector
5’ PowerCon to 20A two-pin and ground (stage pin) connector
5’ PowerCon to grounded 20A twistlock connector
5’ PowerCon to bare-end power input lead



5’ PowerCon-to-PowerCon xture-to-xture jumper
10’ PowerCon-to-PowerCon xture-to-xture jumper



Source Four LED - Soft Focus Diffuser (included)
Source Four LED - Smooth Wash Diffuser for 6.25” gel frame slots
Source Four LED - Smooth Wash Diffuser for 7.5” gel frame slots
Source Four LED - Smooth Wash Diffuser for 10° lens tubes
Source Four LED - Smooth Wash Diffuser for 5° lens tubes
10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° eld angles, as well
as 19°, 26°, 36°, and 50° EDLT lenses
• For better performance, use the LED 50° barrel



• DMX512 in and thru via ve-pin XLR connectors
• Multiple control options, including RGB, strobe, and console-
free Master/Slave mode
• See DMX Control Table for additional information
The Soft Focus Diffuser ts into a standard A-Size pattern holder and delivers beautiful homogenized light when not in sharp focus. Also, use with patterns for dappled and soft-edge projections.
The Smooth Wash Diffuser is used when extra-smooth blending of multiple Source Four LED xtures is required. The smooth wash diffuser is placed into the gel-frame slot of the lens tube.

Photometrics Click here

bottom of page